Field Vs. Moulded Wire Harness _ Which One To Choose - Miracle Electronics
You’ll always want only the best type of wiring and harnesses for your application, but which one is it for you – field wire harness or moulded wire harness? This is a question that is always stirring up a debate in the minds of those planning on choosing a harness for their system. Considering how confusing and puzzling it may be, we’ve come up with a blog to shed a light on the subject. We’ll discuss, in this blog, the basics of both types of wire harnesses, and the key factors that can help you decide between the two.
Field wire harness
A field wire harness consists of a housing that is screwed in or clipped on, requiring a comparatively lesser setup, thus reducing the time of production. However, building a field wire harness is normally assembled by hand, which makes it a lesser suitable option for high-volume applications. But, for low-volume applications, field wire harnesses can prove to be an ideal choice, especially when you’re looking for a faster development time or prototyping.
Moulded wire harness
A moulded wire harness is made by melting down a large amount of plastic, after which a mould is created into which the high-pressure plastic is inserted. This gives more durability and greater seal strength to the harness. Because this is a fully automated process, moulded wire harnesses can be ideal for high-volume production. But, it isn’t suitable for low-volume applications as it can prove to be very expensive for smaller amounts of products. In the case of high-volume applications, it can prove to be economical and efficient, even though there is more setup involved, because the final products are worth it.
Which one is better?
As mentioned above, you can see that we cannot consider one to be better over the other. Depending upon the application, you can decide as to which one you should choose. A field wire harness is better when you have a small production run, while a moulded wire harness is better when you want a larger volume. But, the decision making process isn’t as simple. There are many other factors that you want to consider too when deciding as to which wire harness to consider.
Budget – A higher budget in hand can make it painless to opt for a moulded wire harness production. But, if you are on a tight budget, it may be difficult. However, you also need to understand that a field wire harness production run is also labour-intensive, which requires a good sum of money too. So, it is a choice between the cost of labour versus the cost of machinery.
Materials – The material you wish to choose decides on which kind of wire harness would be suitable. For instance, a field wire harness generally comprises of metal and plastic components, while a moulded harness is crafted from more durable parts with higher IP ratings.
Durability – When durability is a big concern, a moulded wire harness tends to be comparatively much stronger than a field harness. Obviously, field wire harnesses can be improved to enhance durability, but there are limitations to it.
Repairs – When you need repairs in the future, you must understand that field wire harnesses can be repaired and modified if any issues arise, but a moulded wire harness cannot be fixed.
Consider all the above factors when deciding upon the kind of wire harness you need for your application, after which you can approach an apt wire harness manufacturer. However, when you approach Miracle Electronics, you can rest assured that you’re with the most versatile wire harness manufacturer in India, meaning that you can get almost any and every kind of wire harness manufactured here. Just communicate your requirements, and you’ll have the most reliable and genuine products delivered to you, especially customized to suit your application .
